Skip to the content.

Back

SCARA Robotic Arm Project

Modelling and controlling a SCARA robotic arm.

I defined the reference frames with the Denavit-Hartenberg method for the forward kinematics, then derived the geometric equations for the inverse. The existing code had to be extended there, because θ₂ has more than one valid solution and it only handled one.

The Jacobian turned end-effector velocities into joint velocities. I also added two trajectory modes, linear and circular, both correcting for deviation along the way.

The project was done in a custom simulator, created by my professor at the time, so I don’t have any pictures of it working. Here is one of a SCARA robot to give more context: SCARA

Highlights

Lowlights

Lessons Learned